Desert Eagle Gold Plated Cost

The greenhorn - Part 1

Hello,
may remember that I said that I would have devoted to painting some of the Napoleonic Perry before returning to the Project Z, well, I lied .....
Yesterday I went to the cinema (to see Rango, cute little film without infamy and without praise), and as I got home, my eye fell on the cover of the first issue of the comic CARAVAN I have been provided. .. Well, I was struck by the fact that the protagonist's clothes were almost equal to those of the Reaper miniature I had just changed.
Although the miniature was very nice as it was, and I must say that seeing Zombieland allowed me to appreciate even Even more, I wanted to represent the protagonist and all I have to make a quick little "weapon swap" using the ax of hasslefree kindly given to me by Zerloon.
After a morning of painting, I can say that it has completed the miniature, again nothing special but I am beginning to be satisfied by the speed with which I am painting with a certain level of quality ... Continue so! :)
now give the floor to you for your comments which are, as always, very welcome.

Wall Mounted Headboard

Barbarella where are you? - Part 3

Hello again everyone ...
As promised, we return to talk about modeling. Being almost the month of April, and only decided to go in the cold Albion in the new edition of Health , and the evil Zerloon I have decided to participate "in looseness" to the painting competition which will be held there.
why we decided to participate in the specific category of fair competition that brings the thumbnails of the previous memorial. Since
Zerloon far ahead of me, I also decided to complete my, as remember, was well under way. After one, not too long painting session, I completed the hair and the base of the miniature trying to touch up minor defects that I noticed as they completed the model. As you can see, nothing special but, since I am really bad in metallic colors, I must say I very pleased with the result obtained on the robot. Final detail to add is a small rectangular wooden plinth beneath the base and then is over ... We hope that in the race at least give him a look! ;)

Miniature Cannon Italy

Aviation History Museum in Vigna di Valle.

Hello, today I decided to bore you a bit 'with a post from an entirely different nature.
are in fact just returned from a trip (yet another) military airport Vigna di Valle, Italian Air Force's center of the museum and wanted to share with you some pictures I took ..
Being a fan of having "old way", will result only photos aircraft of the First World War and the second most a few grains here and there .. Meanwhile
beccatevi my nice big face (unfortunately my hair has reverberated there be light! ^__^') .
Enough talking, to you the photos but I promise that my next post will be modeled;).

















For now all, I hope not to have bored you with these pictures, but I think a bell'aereo there is always a good idea!
Hello ..

Isalean Protein Shake

A book is not a weapon ... Not always at least .. - Part 1

Hello everyone ....
As promised in my last post, this time I have devoted myself exclusively to a "helpless" to be placed in the city infested with zombies. What could be more appropriate than a student armed only with a book of Latin literature? Having said that, I dedicated myself to paint the miniature trying to get more "soft" as possible with light skin, being a girl, I did not mark the features too much risk of getting a big boy rigged ..
At first I was fought on the school uniform because I had already painted fierce student and I wanted to achieve something similar, the problem was that, wanting to paint the piece with the same colors, I would find myself with some clothes with distinctly different cuts (especially with regard to the skirt) and I would get an effect, I think, unrealistic. It
I then took the opportunity to change the subject and, following the advice of Osiris, I painted the skirt with a light gray that contrasts well with the white shirt and red sweater school ... For the base, however, I decided to keep it simple (some might even say trivial) and I used a simple effect base with asphalt.
I think for now is all my next models to be completed should be the thumbnail of HEALTH-2010 (I have to finish before going to London in April, I can not participate in the painting competition!) Rifles and two English of Perry Miniatures. So I think
abandon the Project Z for a while (not much, quiet) but who knows me knows that I respect my intentions difficult .. ;)
Hello!

Kates And Raven Stream

Not all survivors are decent people! - Part 5

Hello ... After reflecting on what base build, I decided to take the side of the road. In this way I could get some variety since I built into the base number of components: asphalt, stone ground variety, some tuft of grass and the inevitable line markings .... Having said that Kurt and I present, little tipaccio recommended that managed to get hold of an old assault rifle .... I think he'll use it as my next campaign for Ganger All Zombie thing .....

For now I decided not to paint other survivors "armed" and to devote some unarmed civilians who populate the city is completing Zerloon ....
To show you that I have not been idle, I give you a little Work in Progress (most advanced) of my next miniature ...
Now pass the ball to you for comments which are, as always, very welcome ...

What To Write On A Shower Cake?

Not all survivors are decent people! - Part 4

Hello,
A quick update to show the work done on hair and rifle .. I can only complete the boots but I will not until I decided mettermici as basing the thumbnail .... Asphalt? Land? Side of the road? I look and I tell you, so maybe I can also do some best photo that light, this night is really bad! ;)

--- EDIT --- I tried to take a photo with a slightly better light ... But I failed ... ;)

Chennai Checking Land Transaction Value

Not all survivors are decent people! - Part 3

Hello,
a little work in progress of my bearded bad guy to show you have not been idle in recent days. I still have to work a lot 'but we are coming to an interesting result.
to you the pictures, as always, your comments are much appreciated.

Chicken Wing Wholesale Brampton

Not all survivors are decent people! - Part 2

Hello,
after several days of reflection on my latest model, I came to conclusion that the left arm just so wrong. That said and grabbed my trusty knife, I cut a wedge in the arm at the elbow of the thumbnail and I cut off his hand. After placing two pins to give solid (rather than to remedy the weakness of conversion, the pin I need to provide a solid base to prepaint of soft plastic that is difficult to paste in a decent way), I glued the arm and hand in way that holds the barrel of a gun. As you can see, unfortunately, the hand is a bit 'too advanced and not where it should actually be, I will serve as a lesson for next time!
Once the glue dried, with a little bit to procreate (the same one with which I carved stucco pants), I finished the wrist and elbow hours repositioned the flap and added to the pants. At this point the model can be called complete, however, before priming, I want to take some 'time to decide whether to attack and what to wear on the shoulder strap ... Do you have any advice? Look
your comments are, as always, very welcome ...